Operating Guide

Figure 19 Figure 20

J. Assembling the RADIO BOX (optional)

1. Locate the wood sides for the CD/Radio housing. There is one for the front, side, and bottom. (see

Figure 21)

2. Attach “A” on side panel with “A” on bottom panel and insert screws. (see Figure 22)

3. Attach “B” on front with “B” on side panel and “C” on front panel with “C” on bottom panel and

insert screws. (see Figure 23)

4. Screw the RADIO BOX to the REAR PANELS. The back opening (the larger opening) on the

RADIO BOX will face the RIGHT REAR PANEL. The front opening (the small opening and where

the CD/radio is inserted) on the RADIO BOX will face the LEFT SIDE PANEL.

Figure 21 Figure 22 Figure 23

K. Installing the CD/RADIO (optional)

1. Unscrew the lock screws on the top of CD/RADIO player.

2. Connect the plug from the CD/RADIO with the plug coming down from the roof. (see Figure

24)

3. Connect the left and right speaker plugs. (see Figure 25 and 26)

4. Connect the antenna plug to the CD/RADIO player. (see Figure 27)

5. Insert the CD/RADIO into the RADIO BOX. It is not necessary to mount the CD/RADIO once you

slide it into the RADIO BOX.