Owner's Manual

Description

DFS-710 10” 2-Way full range passive loudspeaker.

The system comprises of 1x10” high-power low frequency

transducer and 1x1.4” diaphragm compression high

frequency driver.

Big dynamic and high sensitivity, clear & penetrating at

high frequency, good bass sound.

Applications

• Medium conference room

• Multifunctional halls

• Live performance

System Features

• 2-Way full range passive loudspeaker

• 1 x 10” high power low frequency transducer

• 1 x compression driver with 1.4” titanium diaphragm

• 2 x NL4 connector

• Dynamic Fusion Technology™ (DFT)

• Enclosure constructed of 15 mm plywood with durable painting

• 100° x 90° wide dispersion can set better coverage

• Frequency response 55Hz~18kHz

• Sensitivity 97dB

• Computer stimulation design technology ensures good

frequency response and excellent phase feature

• Integral 35mm pole mount receptacle for stand or vertical

installation

407220418850

Please note that this procedure is exclusively for notifying Better Music

Builder and its affiliates that your copyrighted material has been infringed.

Better Music Builder is protected by the U.S. and international copyright.

PAGE 1
407220418850 Please note that this procedure is exclusively for notifying Better Music Builder and its affiliates that your copyrighted material has been infringed. Better Music Builder is protected by the U.S. and international copyright. System Features Description • • • • • • • • • • DFS-710 10” 2-Way full range passive loudspeaker. The system comprises of 1x10” high-power low frequency transducer and 1x1.4” diaphragm compression high frequency driver.
PAGE 2
DFS-710 DFS-710 System: Passive full range wooden speaker with painting Tweeter: 1 x 1.4” diaphragm compression driver Woofer: 1 x 10” high power low frequency transducer Frequency response (-3dB): 55Hz~18kHz Sensitivity (1W@1m): 97dB Rated Impedance: 8 Ohms Maximum SPL: 120 dB (126 dB peak) Power Rating: 250W (RMS) 1000W (PEAK) Dispersion (H x V): 100°× 90° (H × V) Construction: 15 mm, plywood Installation: M8 hanging point Connector: 2 x NL4 Speakon Cabinet Dimensions (W×H×D): 11.8×20.5×13.4 in 30x52.