Instruction manual

Large business communications systems
5-18 Issue 9 May 2003
■ ARS/WCR Toll Restriction: restricts users from dialing the ARS or WCR
Network I toll access code or from completing a toll call over ARS/WCR.
■ FRL: establishes the user’s access to AAR/ARS/WCR routes.
■ CDR Account Code: requires the entry of an account code before an
ARS/WCR call is processed or before completing a TAC call to a toll
destination.
NOTE:
Account code entries are not validated.
For Communication Manager, MultiVantage™ Software, DEFINITY ECS,
DEFINITY G1, G3, and System 75, COS identifies the calling features available to
a station, such as auto callback and priority calling. It also provides for the
assignment of console permissions; these should be assigned sparingly, and only
to terminals that require them. It is especially important that console permissions
not be assigned to remote access extensions.
For DEFINITY G3V2 and later releases, which includes Communication Manager,
MultiVantage™ Software, and DEFINITY ECS, an additional COS option is
available:
■ Call Forward Off/On-Net: allows a user to call forward outside the switch
(Off-Net), or inside and outside the switch to non-toll locations
(Off/On-Net).
For DEFINITY G3V4, the list call-forwarding command displays all stations with
Call Forwarding On/Off Net Call Forwarding and Busy/Don’t Answer (BY/DA).
This display includes the initiating station and destination address.
For DEFINITY ECS Release 5, a default is in place that should help limit
accessibility to the Call Forwarding Off-Net capability. Specifically, the default
value for the
Restrict Call Fwd-Off Net field on the COS screen is y for
every COS.
Also for DEFINITY ECS Release 5, COS can control the Extended User
Administration of Redirected Calls feature. To this purpose, the COS screen
contains two fields:
Extended Forwarding All and Extended Forwarding
B/DA
. The default for both fields is n.