Operating instructions

4
D. UHF FREQUENCIES:
There are a total of 14 different
frequencies for selection as shown in
the diagram.
These 14 frequencies are
default set by the manufacturer.
Therefore, you cannot change them.
Each wireless system has two
built-in UHF frequencies, so these 14
different frequencies are set into 7
groups from A to G. If you use more
than two frequencies (for channel), you
may purchase a different group of
frequencies. For example, if you have
the group A for frequency, then you
need to purchase the group other than
A (i.e. from B to G). Otherwise, the
frequencies will be interrupted.
However, if you find some interruptions
in your wireless system within 200
feet, there is possibility that you may
use the same frequency in your area.
Therefore, you need to change the
frequency in your wireless system, or
you may need to upgrade your
wireless system. For upgrading your
wireless system, we recommend you to
purchase the VM-92U because it has
32 different UHF frequencies for
selection.
E. OPERATING RECEIVER (7
GROUP) FREQUENCY DISPLAY
DIAGRAM
NOTE
01
747.10
MHz
CH
02
802.60
MHz
CH
RF AFRF AF
03
743.03
MHz
CH
04
766.71
MHz
CH
RF AFRF AF
05
738.59
MHz
CH
06
763.38
MHz
CH
RF AFRF AF
07
733.78
MHz
CH
08
759.68
MHz
CH
RF AFRF AF
09
756.72
MHz
CH
10
796.68
MHz
CH
RF AFRF AF
11
774.11
MHz
CH
12
808.15
MHz
CH
RF AFRF AF
13
781.88
MHz
CH
14
810.74
MHz
CH
RF AFRF AF
Group A
Group B
Group C
Group D
Group E
Group F
Group G
01
747.10
MHz
CH
02
802.60
MHz
CH
RF AFRF AF