Operating instructions

2-in-1 BASE MODULE [RECEIVER]
CONTROLS AND FUNCTIONS
FRONT PANEL:
1. MIC 1 VOLUME CONTROL: Controls volume. When pressed,
channel/frequency can be adjusted.
2. MIC 1 SET BUTTON: Confirms selection. Holding the button for 3 seconds
to initiate syncing process with the microphone.
3. MIC 1 LCD SCREEN: Displays system status.
4. MIC 1 POWER INDICATOR: Lights up when the receiver is powered ON.
5. MIC 1 ACTIVE INDICATOR: Lights up when the microphone is ready for
usage. Blinks when the receiver is in the syncing process.
6. POWER BUTTON: Turns the system ON/OFF.
7. MIC 2 ACTIVE INDICATOR: Lights up when the microphone is ready for
usage. Blinks when the receiver is in the syncing process.
8. MIC 2 POWER INDICATOR: Lights up when the receiver is powered ON.
9. MIC 2 LCD SCREEN: Displays system status.
10. MIC 2 SET BUTTON: Confirms selection. Holding the button for 3 seconds
to initiate syncing process with the microphone.
11. MIC 2 VOLUME CONTROL: Controls volume. When pressed,
channel/frequency can be adjusted.
Base Module
3
MIC ROP HON E 1 MIC ROP HON E 2
2-I N-1 B ASE RECE IVER MO DULE
PO WER
SE T POW ER ACTI VE
VOL UME
UHF
VM-93 C G2
2 Wi reles s Micr ophon e Sy stem
SE TPOW ERACTI VE
VOL UME
G2 SERIES
Generation 2
2450.00
MHz
25
CHVOL
22
2456.00
MHz
28
CHVOL
18
2 64 531 1087 9 11