Owner`s manual

24
BetterOutdoorProducts.com
Figure 29
5. Carefully remove battery, making sure cables Do
Not touch any metal surface.
6. Install new battery in reverse order.
Note: If your Quick Dually™ mower is going to be
stored, we recommend using our “Smart” Charger
(10697).
Charging the battery produces gasses that can
explode.
Never smoke near the battery and keep sparks and
flames away from battery.
Starter Solenoid (10127)
1. Remove battery. Refer to Battery Replacement.
2. Using a 3/8” wrench, remove the white trigger wire.
3. Using a 1/2” wrench, remove the starter cable
located on the bottom of starter solenoid Figure 30.
Figure 30
4. Using a Phillips screwdriver and 7/16” wrench,
remove solenoid Figure 31.
Figure 31
5. Install new solenoid in reverse order.
Note: Make sure to re-attach the green ground wire
behind the solenoid mounting bolt.
Fuse
1. All electric start Quick Dually™ mowers are
equipped with an automotive type 10-amp fuse that
is located near the top of starter solenoid.
Hour Meter (10220)
1. Unplug harness from hour meter.
2. Squeeze tabs and push out hour meter.
3. Install new meter in reverse order.
Note: The single green wire plug(s) into the top
horizontal pin. To view full wiring schematics, refer to
Wiring Schematics.