Owner`s manual

25
BetterOutdoorProducts.com
Motion Control Interlock Switch
1. Remove the hairpin cotter Figure 32.
Figure 32
2. Remove the clevis pin Figure 33.
Figure 33
3. Remove motion control lever.
4. Remove the interlock switch by pressing the tabs in
through the holes in the base of hydro control
Figure 33.
Figure 33
5. Replace switch and install in reverse order.
Blade Engagement Control Cable (10081)
1. Disconnect the wiring plug from the safety switch
under the PTO control Figure 34.
Figure 34
2. Remove PTO knob by turning counter clockwise.
3. Using a 3/8” wrench, remove the 4 mounting screws
Figure 35.
Figure 35
4. Remove the belt guard cover (refer to
Belt Guard Cover).
5. Remove cotter pin and release cable from bracket
Figure 36.
Figure 36
3
5