User Manual
16
2. Pulsing Display: Save-state has been changed - If a save-state is loaded, then changed or altered in
any way the memory cell number in the LED display will pulse. The entire display dims and brightens slowly as
if breathing. This is to alert you that a change from the stored save-state has occurred.
3. Overwrite dialog: User interaction needed to conrm memory cell overwrite - occurs when you
press and hold the PRESET knob for longer than 2 seconds, as described above in Storing Custom User States.
4. Absolute Value Display: Shows actual value on knob change - This is very useful when precisely
setting levels, frequency or bandwidth. When you change any value on the EQ, the absolute value will be
momentarily displayed on the LED screen. In the case of frequency, the actual frequency will be shown in Hertz,
gain in decibels, bandwidth in octaves.