Use and Care Manual

DIGITAL FOLDING TRAVEL ALARM CLOCK SET OF 2
Features:
• LCD Display shows: Time/Alarm/Timer, Day, Temperature, Month and Date.
• Alarm clock with alarm mode and snooze mode.
• Timer feature up to 23:59:59 hours.
• Thermometer (C°/F°) shows the current ambient temperature.
Instructions:
•Pull plastic insulator strip to activate battery (included).
• Temperature Mode (1): Press the DOWN/C/F button to change from °F to °C (Fahrenheit to Celsius).
• Set AM or PM Format (2): Press the ADJ/UP button to choose between 12
and 24-hour format.
• Set the Time (3): Press SET to set up the time/date, one after each other, by following the sequence of hours,
minutes, years, months, days and by pressing UP/DOWN/SET to finish each setting separately.
Hours→minutes→years→months→days→exit
• Set the Alarm/Snooze (4): Press the MODE button to set Alarm and Snooze. In Alarm Mode press
SET into Alarm Mode and Snooze Mode to set hours, minutes, snooze, alarm tone (choose from 1-8 different tones)
by follo
wing the sequence below and press UP/DOWN/SET to finish each setting separately.
Hours→minutes→snooze→alarm tone→exit
In Alarm Mode press ADJ/UP button to display the Alarm and Snooze symbols to indicate the Alarm and Snooze are ON. When alar m time is up, it rings for 1 minute.When Snooze is set up, Snooze will ring ONLY twice after alarm rings the
first time (total of 3 rings).
If no Snooze is set up; the alarm will ring only ONCE.
After the alarm rings, pressing any button (ex
cept for “set”), will stop ringing the alarm. If snooze is ON,
the alarm will go ON again and pressing any button (except “set”) will activate the 2nd snooze ring.
After the third ring, pressing any button will shut off the alarm. The alarm tone can be cancelled completely by pressing SET.
When setting up the Snooze, the time interval will be 60 minutes. This is the default interval time between 1
st
and 2
nd
snooze rings. Make sure to adjust this interval time to the desired time in between snooze rings. Use the “ADJ/UP
nd
or DOWN/C/F button to set the time (in minutes) between first snooze ring and 2 snooze ring.
• Set the Timer (5): Press Timer to set Timer.
In Timer Mode press SET to set hours, minutes and seconds by following the sequence below and pressing
UP/DOWN/SET to finish each setting separately.
Reverse timing mode→hours→minutes→seconds
How to replace the batteries: Pull out the battery cover and remove the used battery. Insert the new battery in
the same direction as the used one and close the battery cover.
Tips: Do not press the LCD screen.
If there is no display when plas
tic insulator strip is pulled, open & close the battery cover.
WARNING:
Do NOT mix old and new batteries.
Do NOT discard batteries in fire.
Cell batteries may present a choking risk & hazard. If swallowed seek
medical attention immediately.
Keep away from children. Batteries are to be handled by adults ONLY.
1
TEMPERATURE MODE
3
SET THE ALARM / SNOOZE
4
SET THE TIMER
5
SET THE TIME
2
SET AM PM
BATTERY CASE (BATTERY INCLUDED)
Customer Support:[e-mail]
DIGITAL FOLDING TRAVEL ALARM CLOCK SET OF 2
Features:
• LCD Display shows: Time/Alarm/Timer, Day, Temperature, Month and Date.
• Alarm clock with alarm mode and snooze mode.
• Timer feature up to 23:59:59 hours.
• Thermometer (C°/F°) shows the current ambient temperature.
Instructions:
•Pull plastic insulator strip to activate battery (included).
• Temperature Mode (1): Press the DOWN/C/F button to change from °F to °C (Fahrenheit to Celsius).
• Set AM or PM Format (2): Press the ADJ/UP button to choose between 12
and 24-hour format.
• Set the Time (3): Press SET to set up the time/date, one after each other, by following the sequence of hours,
minutes, years, months, days and by pressing UP/DOWN/SET to finish each setting separately.
Hours→minutes→years→months→days→exit
• Set the Alarm/Snooze (4): Press the MODE button to set Alarm and Snooze. In Alarm Mode press
SET into Alarm Mode and Snooze Mode to set hours, minutes, snooze, alarm tone (choose from 1-8 different tones)
by follo
wing the sequence below and press UP/DOWN/SET to finish each setting separately.
Hours→minutes→snooze→alarm tone→exit
In Alarm Mode press ADJ/UP button to display the Alarm and Snooze symbols to indicate the Alarm and Snooze are ON. When alar m time is up, it rings for 1 minute.When Snooze is set up, Snooze will ring ONLY twice after alarm rings the
first time (total of 3 rings).
If no Snooze is set up; the alarm will ring only ONCE.
After the alarm rings, pressing any button (ex
cept for “set”), will stop ringing the alarm. If snooze is ON,
the alarm will go ON again and pressing any button (except “set”) will activate the 2nd snooze ring.
After the third ring, pressing any button will shut off the alarm. The alarm tone can be cancelled completely by pressing SET.
When setting up the Snooze, the time interval will be 60 minutes. This is the default interval time between 1
st
and 2
nd
snooze rings. Make sure to adjust this interval time to the desired time in between snooze rings. Use the “ADJ/UP
nd
or DOWN/C/F button to set the time (in minutes) between first snooze ring and 2 snooze ring.
• Set the Timer (5): Press Timer to set Timer.
In Timer Mode press SET to set hours, minutes and seconds by following the sequence below and pressing
UP/DOWN/SET to finish each setting separately.
Reverse timing mode→hours→minutes→seconds
How to replace the batteries: Pull out the battery cover and remove the used battery. Insert the new battery in
the same direction as the used one and close the battery cover.
Tips: Do not press the LCD screen.
If there is no display when plas
tic insulator strip is pulled, open & close the battery cover.
WARNING:
Do NOT mix old and new batteries.
Do NOT discard batteries in fire.
Cell batteries may present a choking risk & hazard. If swallowed seek
medical attention immediately.
Keep away from children. Batteries are to be handled by adults ONLY.
1
TEMPERATURE MODE
3
SET THE ALARM / SNOOZE
4
SET THE TIMER
5
SET THE TIME
2
SET AM PM
BATTERY CASE (BATTERY INCLUDED)
Customer Support:[e-mail]