User manual

4 – Felt cone

Smoothing and polishing the edge of the nail after

filing as well as for cleaning the nail surface. Always

polish in circular movements and do not allow the

felt cone to rest in one place, otherwise friction

could cause heat to develop.

5 – Sapphire callus rasp

For rapid removal of stubborn calluses and hard skin

on the soles of feet and heels This attachment can

be used on large areas.

7 – Flame milling cutter

For removing ingrowing nails. Carefully guide the

flame cutter up to the part to be treated and remove

parts of the nail as necessary.

6 – Cylindrical milling cutter

Grinding of lignified foot nail surfaces as well as

smoothing of these. For this purpose, apply the

milling cutter horizontally to the nail surface and re-

move the unwanted layer of nail using slow circular

movements.

When filing, always work from the outside of the nail towards the tip!

Always check results regularly during treatment. As soon as the application

becomes unpleasant, stop the treatment.

4. Cleaning/care

Before cleaning the power unit, always unplug it from the socket outlet!

– Clean the instrument with a slightly moistened cloth. You can also

moisten the cloth with mild soap suds to remove more stubborn dirt.

– If necessary, for reasons of hygiene, the attachments can be cleaned with

a cloth or brush moistened with alcohol. Dry them carefully afterwards.

– Do not drop the instrument.