User Manual

9
Error display Possible causes of errors Correction of errors
„Lo“ Low Power. Change the battery.
No display. Battery is empty, battery was inserted incor-
rectly or the scale is broken.
Scale shows unrealistic results. Wait until scale scale switches off automati-
cally. Repeat measurement.
Place the scale on level flooring (no carpet).
Don’t move during weighing.
10. Technical specifications
Battery type 2 x 3 V lithium batteries CR2032
Measuring range 6.6 lb to 400 lb (3 kg to 180 kg)
Switch activation force 11 lb (5 kg)
Weight unit 0.2 lb increments (100 g)
Body fat, water, muscle percentage unit 0.1 % increments
Electrical current of B.I.A. max. 5 μA / 1 V
Fat percentage range 5 % to 55 %
Water percentage range 25 % to 75 %
Muscle percentage range 25 % to 80 %
Temperature operating range 41 °F to 95 °F (5 °C to 35 °C)
Storage temperature range -4 °F to 140 °F (-20 °C to 60 °C)
Scale size 12.8” x 12.8” x 0.9” (320 mm x 320 mm x 24 mm)
Net weight of scale 5 lb (2.3 kg)
Subject to technical modifications.
11. FCC Part 15, Subpart B
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• R eorient or relocate the receiving antenna.
• I ncrease the separation between the equipment and receiver.
• C onnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• C onsult the dealer or an experienced radio/TV technician for help.
12. Warranty
Limited Lifetime Warranty For Original Purchaser
Your Beurer body analysis scale, Model BF221, is warranted to be free from defects in materials and work-
manship for the life of the product under normal conditions of intended use and service. This warranty extends
only to the original retail purchaser and does not extend to retailers or subsequent owners.
We will, at our option, repair or replace the Beurer body analysis scale, Model BF221, without additional
charge, for any part or parts covered by these written warranties. No refunds will be given. Repair or replace-
ment is our only responsibility and your only remedy under this written warranty. If replacement parts for
defective materials are not available, Beurer reserves the right to make product substitutions in lieu of repair
or replacement.