Instruction Manual

19
2� Hold the sensor 1-1 ½ inches (2-3 cm) from the object to be measured
and press the
START Button. After about a second, the thermometer
will beep once and display the measurement. Press the ON/OFF button
to shut the thermometer o.
Ambient temperature:
To measure the ambient temperature in your location, switch the thermometer to ambient temperature
mode.
1� Press the ON/OFF Button to switch the thermometer on. Change the
thermometer to ambient temperature mode by pressing the MODE/
MEM Button twice. The ambient temperature mode icon will
display.
2� The ambient temperature around the thermometer will display. The
thermometer will shut o about one minute if no buttons are pressed;
press the
ON/OFF button to shut the thermometer o manually. Note
that ambient temperature measurements are not saved.