Operation Manual
10
6. Operation
Ensure that the device is switched off before plugging in the mains cable. Switch on the device using the On/off button.
The start program starts.
The massage speed can be increased/decreased by one setting as required by pressing the “Speed” button.
You can choose between 3 different massage programs (with automatic speed settings) by pressing the “Programs”
button.
- Relax: A wave-action, relaxing massage.
- Vital: Vibrant and pulsating massage.
- Active: Penetrating and pulsating massage.
The infrared heating can be switched on in any massage program, using the “Heat” button.
Guide the device with both hands to the area of the body to be massaged. You can stand, sit or lie down and can mas-
sage yourself or another person. The massage intensity can be altered by pressing more or less firmly with the massage
device. Do not massage a certain site of the body for longer than 3 minutes and then change to other area of the body.
After using for a maximum of 15 minutes, unplug the device and let it cool down. Keep the device dry.
Note
•
Do not use the massage device just before going to bed. The massage can also have a stimulating effect
and may cause difficulties in getting off to sleep.
•
The device has an automatic shut-off mechanism set to a maximum operating period of 15 minutes.
WARNING
•
The massage must be pleasant and relaxing at all times. Stop the massage or change the position of the
massage device if you find it is painful or unpleasant.
•
Do not jam or force any part of your body, in particular your fingers, into the area of the massage head.
7. Care and storage
Cleaning
To clean the unplugged and cooled device, wipe with a slightly damp microfibre cloth. Then you can clean it with
a cloth which is no more than lightly moistened. You can also use a mild detergent.
WARNING
•
Disconnect the device before cleaning it.
•
Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the device or
accessories.
•
Do not use the device again until it is completely dry.
Storage
Keep the massage device in a cool and dry place where it is out of the reach of children. We recommend storing
the device in its original packaging.
8. In the event of problems?
Problem Cause Remedy
Massage head does
not move.
Appliance not connected
to the power supply.
Connect the plug to the mains supply and
switch on the appliance.
Device is not does not move. Switch on the appliance.
Overheating protection
tripped.
Disconnect device from mains power, wait at
least 15 minutes, plug in again and switch on.
9. Technical data
Dimensions (W/H/D) ~ 160/150/450 mm
Weight ~ 1740 g
Rated output 20 W
Rated voltage 220-240 V ~ 50 Hz