Operation Manual
12
5. Appliance description
Shiatsu massage pillow (front)
1 2 neck massage fingers
2 Turning handle for height adjustment
3 4 massage heads
4 Fastening straps
5 Connecting coupling
6 Power supply unit with plug connector and power
cable
7 Hand switch
8 Storage bag
Hand switch
1 Button
2 NECK button
3 FULL BACK button (entire back massage)
4 UPPER BACK button (upper back massage)
5 LOWER BACK button (lower back massage)
6 HEAT button (heat)
7 SPOT buttons (localised massage)
8 SPEED button (massage intensity)
9 SHIATSU button (Shiatsu massage)
10 ROLLING button (rolling massage)
11 DEMO button
6. Start-up
CAUTION
•
IMPORTANT: Before using the device for the first time, ensure you have released all transport
locks on the massage mechanism. To do this, remove the screws using the tool provided on
the rear of the seat cover. If the transport lock screws are not removed first and the Shiatsu
seat cover is used immediately, the device will become irreparably damaged and unusable.
The warranty will not apply in this instance.
•
Reuse the transport lock screws when transporting the device in the future. Transporting the device
without using the transport locks could cause irreparable damage to the device.
•
Position the seat cover upright on a suitable seating arrangement with seating surface and backrest
(chair, sofa, or similar). Ensure that the seat cover is supported over its entire area and has a suf-
ficiently high backrest.
•
Use the flexible fastening straps and Velcro strips to secure the Shiatsu seat cover.
•
Connect the power supply unit and the seat cover with the plug connector.
•
Connect the device to the mains by plugging the plug into the socket.
1
3
4
4
2
4
4
5
6
78
1
2
3
4
5
6
8
9
11
10
7