Operation Manual

14
8. Care and storage
CLEANING
WARNING
• Before cleaning disconnect the power supply unit from the mains socket and disconnect it from
the device.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the
device or accessories.
• Smaller stains can be removed using a cloth or moist sponge together with a little liquid detergent
for delicate fabrics if necessary. Do not use any cleaning agents containing solvents.
• Do not use the device again until it is completely dry.
Storage
If you do not use the device for longer periods, we recommend storing it in the original packaging in a dry
place without weighting it down.
CAUTION
• If you use the transport lock screws, take care to remove these before starting the device when you
next use it.
9. In the event of problems
Problem Cause Remedy
Massage heads
rotating at
reduced speed.
The load on the massage
heads is too great.
Reduce the contact pressure on the head.
Massage heads
only rotate in the
upper or lower
region.
The massage has been
activated for the limited
region.
Press the FULL BACK, UPPER BACK or LOWER
BACK buttons to change the massage region.
Press the NECK button to activate the neck mas-
sage.
Massage heads
not moving.
Appliance not connected to
the power supply.
Connect the plug to the mains supply and switch
on the appliance.
Device not switched on. Switch the device on with
.
Select the massage region.
Transport locks were not re-
moved. Massage mechanism
is damaged.
Contact your authorized dealer or the service ad-
dress.
Overheating protection
tripped, device is damaged.
Contact your authorized dealer or the service ad-
dress.