Operation Manual

14
6. Start-up
CAUTION
• IMPORTANT: Before using the device for the first time, ensure you have released all transport
locks on the massage mechanism. To do this, remove the screws using the tool provided on
the rear of the seat cover. If the transport lock screws are not removed first and the Shiatsu
seat cover is used immediately, the device will become irreparably damaged and unusable.
The warranty will not apply in this instance.
•  Reusethetransportlockscrewswhentransportingthedeviceinthefuture.Transportingthedevice
withoutusingthetransportlockscouldcauseirreparabledamagetothedevice.
•  Positiontheseatcoveruprightonasuitableseatwithasittingareaandbackrest(chair,sofaor
similar). Make sure that the seat has a sufficiently high backrest.
• Youcanachievethemostcomfortablemassagepositiononachairwithanuprightback.
•  UsetheflexiblefasteningstrapsandVelcrostripstosecuretheShiatsuseatcover.
•  Connectthedevicetothemainsbypluggingtheplugintothesocket.
7. Operation
Pressyourbackagainstthemassagerinanuprightposture.Theuprightpostureisnecessarytoenableaccu-
rate scanning of your back. The body scanning function is used for this and determines the size of the user..
Themassagemustbepleasantandrelaxingatalltimes.Stopthemassageorchangeyourpositionorthe
contactpressureifyoufinditispainfulorunpleasant.
• Donotforceorjamanypartofyourbody,inparticularyourfingers,betweenthemovingmassageelements
ortheirholdersinthedevice.
• Sitcomfortablyanduprightontheseatcover.Ensureyousitcenteredandsuchthatthemassageheads
canmovetotheleftandrightofyourspinalcolumn.
• Switch on the massager with the button. ThebodyscanningLEDdisplayflasheswhileyourback is
beingscanned.Afterscanning,therelaxmassageprogramisactivated.
TheLEDssignalthemassagefunctionswhicharecurrentlyselected.
• Theautomaticswitch-offfunctionisactivatedwithselectionofthemassageregionandispresetto15min-
utes.Youcansettheautomaticswitch-offfunctionto5,10or15minutesbypressingthetimer button.
Pleasenotethatchangingthetimersettingmakesthetimerstarttocountagainfromthebeginning.To
avoidoverheatingthedevice,selectthemaximummassagedurationatthebeginningofthemassageand
do not change it again during the massage.
Youcanspecifythesettingsasfollows:
1. Automatic massage programs
Press the relax, refresh or therapy button.
relax program:
 Acombinationofswingandrollingmassagemassagesyourbackandneckarea.
refresh program:
 AcombinationofShiatsuandrollingmassagemassagesyourbackandneckarea.
therapy program:
 AcombinationofShiatsu,rollingandswingmassagemassagesyourbackandneckarea.
2. Shiatsu back and neck massage
Presstheshiatsu button. Then use the full, back or neck button to select the desired massage area.
3. Swing back and neck massage
Presstheswing button. Then use the full, back or neck button to select the desired massage area.
You can use the spotbuttontoselectaspotmassage,i.e.Shiatsuandswingmassagewithoutvertical
movement.Youcanchangethepositionofthespotmassagebyholdingdownoneofthearrowsnextto
thespotbuttonuntilthedesiredpositionisreached.