Owners Manual

User Manual for BB Refrigerators Beverage-Air
Rev. 10/20 Beverage-Air 11
SLIDING DOORS, ASSEMBLY
Leveling
1. To insure proper operation, the cabinet must be
level.
2. Level the cabinet, see page
3. Verify the level condition by putting a level on the
header (gure 2a) and side frame (gure 2b) of
the door assembly.
1. Each door can be removed for cleaning and
maintenance.
2. To remove a door, lift it up o the track and pull the
bottom of the door away from the cabinet. Upwards
pressure must be maintained (gure 3a) while pulling
the door bottom.
3. Once the bottom of the door has cleared the track, pull
the door slowly away from the self closing device as it
retracts and awy from the cabinet (gure 3b).
4. To install a door, simultainously lift and rotate the
door.
5. While lifting, insert the upper corner of the door into
the upper door track so that the torpedo is placed
against that corner of the door (gure 3c).
6. Push the self closing device with the door until the
door becomes horizontal, then pivot the door down
onto the lower frame track (gure 3d) and allow the
door to rest on the sil track.
7. Check for proper operation.
Figure 3b
Door Removal and Installation