Owners Manual
User Manual for BB Refrigerators Beverage-Air
Rev. 10/20Beverage-Air20
Operation is simple, just keep it connected to the correct
power supply and the refrigerator will maintain the
internal temperature it has been set to. Keep the door
closed as much as possible to avoid unnecessary run time.
NOTE: Once the unit has been started and reaches proper
storage temperatures, it may be loaded with product.
No provision is made in the cabinets to quickly pull
a keg of beer down to temperature. Best results are
obtained when a pre-chilled keg is used. Otherwise it
can take several hours to reduce the keg to the desired
temperature.
Adjusting the set temperature lower will NOT cause the
system to lower the temperature faster. When on, the
refrigeration system is always operating at maximum.
The internal fan will remain on when ever the unit is
connected to power.
The compressor and condenser fan motor will only be on
when the controller senses an increase in internal cabinet
temperature passed the set point.
Before making temperature adjustments, allow the unit
to stabilize for 1 hour and verify that a temperature
adjustment is needed. If an adjustment is needed; turn
knob one number and allow the unit to stabilize for 1 hour
before rechecking the cabinet temperature. If additional
adjustment is needed, repeat process to achieve the
desired operation temperature.
Clockwise = Colder
Counter Clockwise = Warmer
Excessive tampering with temperature control could lead
to service diculties.
* For operation above 3000-ft altitude, have thermostat
adjusted by a qualied technical service representative.
Cautions
Care must be taken whenever moving or servicing the
unit. The refrigerant is contained in a sealed system, but if
released it may be ammable.
USING THE BB24HC
Turn the dial
clockwise to lower
the temperature or
counter clockwise to
raise the temperature.