Specification Sheet

CABINET CONSTRUCTION
MODELS:
DD36HC-1-B
DD36HC-1-S
DD Draft Beer Equipment-Direct Draw Dispenser
DD36HC Solid Door
Hydrocarbon Series
DD36HC Direct Draw Dispenser: Standard Models
Project: ____________________________
Item: ______________________________
Locaon: ___________________________
Approved: _________________________
AIA#
SIS#
3779 Champion Blvd., Winston-Salem, NC 27105
1-888-845-9800 Fax: [phone]
Beverage-Air.com [e-mail]
 Exterior is wear resistant vinyl on steel in black or stainless steel
finish
 Top is made from heavy-duty stainless steel including drip tray
 Interior is galvanized steel on walls and ceiling, reinforced floor
and doorsill are heavy duty stainless steel
 Full electronic control
 Drain tube located at bottom front of cooler for connection to floor
drain
 3” Insulated dispensing tower with dual draft arm
 Self-closing door with lock
 Magnetic gaskets provide positive door seal
 Field reversible door
 Compressor available on left or right, specify at time of unit order
 Stainless steel interior available
 Turbo taps
 1 Half keg option
 Wine models
 Wine taps
 Faucet locks
 Glass rinser
 3”-6” casters or 6” black legs
 Foot pedal door opener
 1-4 Tap tower
 2, 3 & 4 way manifolds
OPTIONS & ACCESSORIES
REFRIGERATION SYSTEM
 Refrigeration system uses R290 refrigerant to comply with all
environmental concerns
 Models feature forced air refrigeration to keep beer in kegs ice cold
for dispensing
 Automatic, non-electric evaporator
 Epoxy coated evaporator coil
BEVERAGE-AIR
DD36HC-1-B
3 Year Parts/Labor Warranty
Additional 2 Year Compressor Warranty