GL specsgeet

Item No.
Quantity
GLASS FROSTERS
GF SERIES
MODELS:
GF24
GF34
GF48
Commercial Refrigeration Equipment
General Specification
GF SERIES—GLASS FROSTERS
The most complete line of glass frosters available with the right
size to fit your application (24”, 34” and 48” sizes available).
Shallow well design is “user-friendly” with access to the interior
base within easy reach. Flexibility in design provides for plate
storage and chilling by removing adjustable shelving.
CABINET CONSTRUCTION
Standard, cabinet exterior construction includes attractive, wear
resistant vinyl on steel in black finish. Equipped with stainless
steel top, easy glide lids and counter top with edge. Stainless
exterior options available.
Standard interior construction utilizes galvanized steel with slid-
ing stainless steel lids which are easily removable for cleaning.
Foamed-in-place CFC and HCFC-free polyurethane insulation
enhances the structural strength of the cabinet and helps
increase energy efficiency.
REFRIGERATION
Refrigeration system uses R404A refrigerant, which is CFC and
HCFC-free for compliance with environmental safety concerns.
System includes automatic defrost of coils as standard, with a
built in condensate evaporator system, which eliminates the
need for floor drains or additional plumbing.
Condensate elimination is automatic and non-electric.
ELECTRICAL
Units wired at factory and ready for connection to a 115/60/1
phase, 15 amp dedicated outlet. 6’ long cord and plug set in-
cluded.
Available From:
*Note: Not all markings may apply to all model variations.
ELECTRICAL CONNECTION
Units pre-wired at factory and include 6’
long cord and plug set.
GF34L (shown in stainless exterior finish)
GF24L
GF48L
3779 Champion Blvd., Winston-Salem, NC 27105
1-888-845-9800 Fax# [phone]
http://www.Beverage-Air.com