User Manual

Byron BT – In-ear headset
10
6.2 Multi point setting
It is possible to connect and use 2 devices simultaneously.
Setting Multi point
• Please pair the Bluetooth in-ear headset to the first device
according to the pairing process (refer to pairing process).
• Turn off the Bluetooth in-ear headset.
• Press the MFB button for around 4 seconds until the blue LED is
continuously on.
• Please pair the Bluetooth in-ear headset to the 2nd device
according to the pairing process.
• Then, turn off the Bluetooth in-ear headset and turn on again, it
will be connected to two devices.
How to use Multi point
• At the status of connecting two devices, press the MFB button to
answer a call when there is an incoming call.
• At the status of connecting two devices, press the MFB button to
listen the music that was played lately.
6.3 Call
• Answering a call:
Press the MFB button to answer a call.
• Ending a call:
Press the MFB button briefly to end a call.
• Rejecting a call:
During an incoming call, press the MFB button for about
1 second.
• Converting a call:
During a call with mobile, press the MFB button to convert to the
headset (to call with the mobile again, use your mobile phone
menu).
• Volume control:
With the + and – buttons you can control the volume.
• Microphone Mute:
If you press the + or – button for about 1 second during a call,
the microphone will mute.
• During mute, it will be released, if you press the + or – button for
about 1 second.
• Depending on the mobile phone models, the above functions may
be different. Please refer to the mobile phone model.