User Manual
Lagoon ANC – Bluetooth® Headphones
15
english
Troubleshooting
P
roblem
C
ause
S
olution
T
he headphones cannot be
switched on
B
attery is empty or almo
empty
C
harge the battery
No audio output No Bluetooth® connection Pair the headphones with the
p
layer
T
he headphones do not
a
ppear among the
available Bluetooth® devices on
the player
•
The headphones are switched
o
• The headphones are not in
pairing mode
• A Bluetooth® connection to
another player exis already
•
Turn on the headphones
• Put the headphones into
pairing mode
• Disconnect the Bluetooth®
connection to the other player
and connect the headphones
to the desired device
Playback volume is too low, even
though the headphone volume
is set to maximum
The received audio signal is too
low
Increase the playback volume
on the player to maximum
The sound is harsh and the bass
response is too low
Insuicient seal of the ear pads Adju the headphones over
your ears so that maximum seal
is achieved
The wireless range is too low or
the connection is disrupted
There are inteerences with
other devices
Move away from WLAN routers
and microwave ovens, ensure
that your body is not between
player and the headphone
Using the audio cable
Delivery includes an audio cable with a mini jack plug (3.5 mm) on either end. With the audio cable you
can use the headphones without Bluetooth® connection or when the battery is empty.
1. Switch o the headphones so that no electricity is drawn from the battery.
2. Connect one end of the audio cable to the jack socket of the right housing shell.
3. Connect the other end of the audio cable to the player.
Maintenance
• To clean the Lagoon ANC use only a so cloth - either dry or slightly damp.
• Do not use cleaners that contain solvents as they can damage the suace.
ANC – Switching on and o
The Active Noise Cancellation (ANC) can be switched on
and in two ages with the ANC switch .
Hints for be ANC function
Active noise cancellation works paicularly well at low
frequencies, such as the noise of wheel tires on rails or
the deep roar of aircra engines. Therefore, active noise
cancellation is mainly used for rail or air travelling.
Active noise cancelling headphones eliminate annoying
ambient noise be, when the battery is charged.
When using this function, always make sure that the
battery is charged.