User Manual
Lagoon ANC – Bluetooth® Headphones
9
english
Multi point operation
T
he headphones can be paired to a maximum of 15 Bluetooth® enabled devices. Active connections
c
an be eablished with up to two devices at a time. However, playback of music and phone operation
is only possible with one device at a time. Phone operation has priority over playback of music;
i. e. playback of music is interrupted during phone calls.
The following priorities apply during the use of playback devices:
P
riority
P
rofile
P
layback device (PD)
1 HFP (phone operation) AG 1 (device used fir)
2 HFP (phone operation) AG 2 (device used second)
3 A2DP (playback of music) AG 1 (device used fir)
4 A2DP (playback of music) AG 2 (device used second)
Setting up multi point
• Pair the headphones with the fir device (refer to “Pairing
with the player”).
• Deactivate the Bluetooth® connection on the fir device.
• Switch the headphones o by using the switch .
• Set the switch to the “Pairing” position.
• Pair the headphones with the second device (refer to “Pairing
with the player”).
• Re-activate the Bluetooth® connection to the fir device that
automatically connects to the headphones.
• Once both devices are paired with the headphones, the
headphones automatically connect with both devices each
time when powered up, provided they are within the range.
Using multi point
If you have connected the headphones with two devices
– and have ju activated media playback, briefly press the
touch pad twice to accept an incoming call.
– and have ju finished a call, briefly press the touch pad
twice to rea the media playback that was playing mo
recently.
“Pairing” position
2 x