User Manual

english

Aventho wireless – Headphones

Maintenance

• To clean the Aventho wireless use only a soft cloth - either dry or slightly damp.

• Do not use cleaners that contain solvents as they can damage the surface.

Problem Cause Solution

The wireless range is too

low or the connection is

disrupted

There are interferences

with other devices

Move away from WLAN

routers and microwave

ovens, ensure that your

body is not between play-

back device and the Aven-

tho wireless

Notes on battery life for Li-Ion batteries

• After charging fully, disconnect the charging cable from the Aventho wireless.

• High temperatures, especially when fully charged can lead to irreversible damage.

• If the battery is not used for extended periods of time, it is recommended to charge

to approx. 50 % and store it at no more than 20 °C.

Spare parts

• Spare parts for the Aventho wireless can be found on the web at:

www.beyerdynamic.com under section “Service”.

Since the ear pads are subject to natural wear, they

should be replaced from time to time.

You can do this easily yourself:

• Grasp the ear pad with a finger from the inside to pull

it off the headphone housing.

• Fit a new ear pad by pressing it onto the headphone

housing until snaps on.

In the event that other components require replacement,

please contact your local beyerdynamic representative.