User Manual

Congratulations and thank you for selecting the TG-X 58
dynamic microphone. Please take some time to read carefully
through this product information before setting up the
equipment.
Applications
The TG-X 58 has been designed for miking vocals, speech
and instruments. It can be used as a handheld or used on a
stand.
The microphone’s barrel is finished with a special soft lacquer
coating which makes the microphone very comfortable to hold
in the hand.
Connection
The TG-X 58 is equipped with a 3-pin XLR-plug. You can
connect the microphone to any microphone input. For
connecting cables refer to “Optional Accessories”.
Setting up and Use
• The TG-X 58 has a locking ON/OFF-switch, to avoid
accidental switching off of the microphone.
Switching on Slide the switch upwards. In this position
you can turn the screw to the left with a
small screwdriver to lock the ON/OFF-
switch.
Switching off Slide the switch downwards. If you have
previously locked the switch, you must
turn the screw to the right with a small
screwdriver first.
• The TG-X 58 has a supercardioid polar pattern and is
capable of high gain before feedback. To achieve maximum
gain-before-feedback, the wedge monitor should be
positioned at an angle of approximately 125° to the
longitudinal axis of the microphone.
• The TG-X 58 has an integrated pop shield. To avoid “pop”
sounds hold the microphone below from the mouth
slightly diagonally to sing or speak across the top edge of
the microphone.
• Supply of the TG-X 58 includes the MKV 108 microphone
clamp for stands with 3/8" or 5/8" thread.