User manual

5
EN
HOW TO CHANGE THE HEADBAND PAD
u To remove the headband pad, carefully pull on the
silicon rap until all hooks of the headband pad are
released from the headband.
u To attach the headband pad, make sure that the
snap-in nose on the right side sits in the right place.
u Then press gently the pad into the headband until
the hooks snap into place.
VERSION
u DT 900 PRO X
Dynamic premium udio
headphones, open, 48 Ω. . . . . . . . . . . Order # 729.906
SUPPLIED ACCESSORIES
u 1 x Straight cable, 3-pin mini XLR and
mini ereo jack (3.5 mm) &
1/4" (6.35 mm) adapter, length 3 m (9.8 )
u 1 x Straight cable, 3-pin mini XLR and
mini ereo jack (3.5 mm) &
1/4" (6.35 mm) adapter, length 1.8 m (5.9 )
u 1 x Bag
ACCESSORIES AND REPLACEMENT PARTS
u Accessories and replacement equipment can be
found at: www.beyerdynamic.com
u If you have technical problems while using the head-
phones or need fuher guidance, please visit our
FAQ website at: suppo.beyerdynamic.com
SERVICE
u If you require service, please contact
qualified service personnel or directly:
beyerdynamic Service- und Logistik Center
E-mail: [e-mail]
u Dismantling the headphone yourself will invalidate
the guarantee.