Operating Instructions

Help with problems / FAQ
12/14 Blue BYRD ANC (2nd generation)
Settings for be sound
To achieve the be possible Bluetooth® sound with
your in-ear headphones, please observe the following
practical tips:
1. Set the volume to minimum on the in-ear headphones
and to maximum on the playback device.
2. Then adju the volume only on the in-ear headphones,
not on the playback device.
This applies only to playback devices that do not
automatically synchronise the volume. On playback
devices that automatically synchronise the volume
(e.g.iPhone, iPad and various Android smaphones), the
headphone volume is always identical to the volume of
the playback device.
3. Deactivate any audio eects that may be present in
the soware of the playback device.
HELP WITH PROBLEMS / FAQ
In-ear headphones will not switch on
Battery is empty or almo
empty.
► Charge the battery.
No audio output.
There is no Bluetooth®
connection.
► Pair in-ear headphones
with the playback
device.
The in-ear headphones do not appear among the
available Bluetooth® devices on the playback device.
The in-ear headphones are
switched o.
► Switch on the in-ear
headphones.
The in-ear headphones are
not in pairing mode.
► Set the in-ear head-
phones to pairing mode.
There is already a
Bluetooth® connection to
another playback device.
► Disconnect the
Bluetooth® connection
to the other playback
device and connect the
in-ear headphones to
the desired device.
Playback volume is too low, although set to maximum on
the in-ear headphones
The audio signal being
played back is too quiet.
► Set playback volume on
the playback device to
maximum.
The sound is harsh and the bass reproduction too low
Insuicient seal on the
earphones.
Try out alternative le and
right eaips until sound is
ideal.
The wireless range is too low, or the connection is
disrupted
There is inteerence with
other devices.
► Keep your diance
from WLAN routers and
microwave ovens.
► Do not and between
playback device and
in-ear headphones.
BATTERY LIFE
• Disconnect the USB connection cable from the charger
and in-ear headphones when battery is fully charged.
• High temperatures, especially with a high charge level,
can cause irreversible damage.
• For battery orage, see Seite 7.
• Switch o the battery-powered product aer use.
CLEANING AND MAINTENANCE
• Use a so cloth moiened with alcohol cleaner to
clean all pas of the in-ear headphones. Make sure
that no liquid enters the housing or the transducer.
• Do not use cleaners containing solvents, as these can
damage the suace.
SPARE PARTS
Spare pas for the in-ear headphones can be found at
www.beyerdynamic.com/service.
DISPOSAL
This symbol on the product, in the user
manual or on the packaging means that
your electrical and electronic devices mu
be disposed of separately from household
wae at the end of their life cycle. For
fuher information, please contact your
local authorities or the dealer where you
purchased the product.
► Always dispose of used batteries or devices with
batteries in accordance with the applicable
regulations. Returning batteries is free of charge.
► Please dispose of discharged batteries only.
► This product’s built-in lithium-ion battery cannot be
easily replaced by the user.
EU DECLARATION OF
CONFORMITY
beyerdynamic hereby declares that this radio
transmission device complies with the EU Directive
2014/53/EU.
► The full text of the EU declaration of conformity can be
found on the Internet at: www.beyerdynamic.com/cod
TECHNICAL DATA
Bluetooth® frequency range 2.400–2.4835GHz
Transmitting power 10dBm
Operating temperature range -10 to +60°C
Charging temperature range 0 to +45°C
► You can find more detailed information about the
technical data online at:
www.beyerdynamic.com/blue-byrd-anc