User's Manual

Quinta – Microphone Units
13
3.6.1 Normal Operating Mode
• Press the microphone button  to switch on the microphone.
• The red LED of the gooseneck microphone will illuminate and
the microphone button  will illuminate green: The micro-
phone is ready to speak into it.
• Using the Quinta CU control unit, up to 4 participants (e.g. 3
delegates and 1 chairman) can speak simultaneously depending
on the setting.
3.6.2 FiFo Mode
• If the microphone units operate in the FiFo mode (first in - first
out), the microphone unit that was switched on first, will be
switched off, when another microphone unit is switched on and
the number of open microphones (NOM) will be exceeded.
3.6.3 Push-To-Talk Mode
• If the microphone units operate in the Push-To-Talk mode (PTT),
the microphone button must be pressed as long as someone
speaks into the microphone. This configuration is recommended
for short interruptions during the meeting.
3.6 Operating Modes
The different operating modes such as “Normal”, “Push-To-Talk” or “Voice Activation” are adjusted with the Quinta Conference software for
all microphone units. The standard operating mode is “Normal”. Please refer also to the appropriate “Quinta Conference Software” or “Quinta
Web Server”manual.
Important:
If the number of open microphones is exceeded, a
microphone can only be switched on manually when
another microphone unit has been switched off.
   
Quinta MU 23 Quinta MU 21Quinta MU 22
Quinta MU 33


Quinta MU 31
3.6.4 Voice Activation Mode
• If the microphone units operate in the Voice Activation mode,
the microphone units are switched on via voice control. That is
the microphone unit is switched on as soon as someone speaks
into the microphone. In this case it is not necessary to press the
microphone button.
Important:
The threshold and the hold time can be configured with
the “Quinta Conference” software for all microphone
units.