User Manual

Quinta – Control Unit

• In order to confirm with “OK” turn the volume control  clockwise

until “(OK)” is displayed. Press the volume control to confirm and

leave the menu.

• The default screen still displays “A”.

• As the control unit is still set to “A” (factory setting), the micro-

phone units will lose the radio link to the control unit. The

microphone button of the microphone units will ﬂash red.

• In order to conﬁgure the control unit to “B” press the volume

control  approx. 3 seconds until the Quinta CU control unit

displays the main menu.

• Turn the volume control  to the right or left until “Room

Combining” is displayed.

• Press the volume control  to enter the submenu.

• Press the volume control  once again to enter the submenu for

configuration of the control unit. For the control unit in room B

turn the volume control until “(B)” is displayed and press the

volume control to select “B” (it is ticked).

• In order to confirm with “OK” turn the volume control  clockwise

until “(OK)” is displayed. Press the volume control to confirm and

leave the menu.

• The default screen displays “B”.

• The microphone units will link to the control unit again. The

microphone button will illuminate white.

• Switch off the microphone units and control unit in room B.

• Continue with the conﬁguration of the control units in room C and

D as described for room B.

• Should you use the “Room Combining” function again, you do not

need to set anything in the “MU Conﬁguration” menu, but only in

the “CU conﬁguration” menu. Here you select the rooms you want

to combine. The microphone units with the selected room

designation will link to the control unit.