User Manual

Quinta – Control Unit

How to combine different rooms – example

• In our example the rooms A, B, C are combined.

In room D a separate system with control unit and microphone

units will be operated.

• In order to avoid interference between the systems, you must turn

off the control units in room A and C or deactive the radio

module of the control unit via the menu of the control unit or with

the Quinta Conference Software via PC by removing all ticks under

the “Room Combining” - “CU conﬁguration” menu item.

• The microphone units which are conﬁgured for room A, B, C will

now link to the control unit in room B.

• Press the volume control  approx. 3 seconds until the

Quinta CU control unit displays “Main Menu”.

• Turn the volume control  to the right or left until “Room

Combining” is displayed.

• Press the volume control  to enter the submenu.

• Press the volume control  once again to enter the submen for the

configuration of the Quinta CU control unit. Turn the volume

control  until “(A)” is displayed and press the volume control 

to select “(A)” (a tick is displayed under the “A”). Turn the

volume control  until “(B)” is displayed and press the volume

control  to select “(B)” (a tick is displayed under the “B”). Turn

the volume control  until “(C)” is displayed and press the

volume control  to select “(C)” (a tick is displayed under the

“C”).

• Do not activate room D, as this is a separate system in a separate

room.

• In room A and C you must turn off the control units or deactive the

radio module of the control unit via the menu of the control unit

or with the Quinta Conference Software via PC by removing all

ticks under the “Room Combining” - “CU conﬁguration” menu

item.

• The microphone units which are conﬁgured for room A, B, C will

now link to the control unit in room B.

Conﬁguration of control units and microphone units in the

combined rooms A, B, C and in room D

• Important:

– The microphone units in the respective rooms must have a

radio link to the control unit.

– The conﬁguration for room A, B, C or D is stored in the

appropriate microphone units.

– When you have only one Quinta system which you want to

use in one room only, you can keep the factory setting of “A”.