Manualshelf

User's Manual

ManualsBrandsBeyerdynamic ManualsElectronicsBodypack Transmitter
12345678910
Synexis – Synexis TH2 Handheld Transmitter
10
1.
2.
3.
3.9 Maintenance
• Protect the handheld transmitter from moisture and sudden impacts.
• For cleaning metal surfaces, use a soft cloth moistened with methylated spirits or
alcohol.
• Clean the foam pop shield under clear running water:
1. Unscrew the microphone basket counter clockwise.
2. Remove the foam pop shield (if necessary use tweezers).
3. Wash the pop shield under clear running water and dry it afterwards with a
hairdryer or allow it to dry overnight.
• Place the dry pop shield inside the microphone basket and screw the microphone
basket clockwise.
Important
• Place the microphone basket and the pop shield on the transmitter again only
when completely dry.
3.8 How to select the mute function
• Press the on/off button and the mute button simultaneously for approx.
2 seconds until the channel and mute display will start to flash.
• Use the mute button to select the requested mute function.
• After approx. 2 seconds the selected mute function will automatically be stored
or immediately if you press briefly the on/off button .
• If the LED will illuminate blue, the microphone is activated. If the LED will
flash red, the microphone is muted.
• There are three different mute functions available:
Push-To-Mute (PTM): Hold down the mute button to mute the microphone.
Push-To-Talk (PTT): Hold down the mute button to activate the microphone.
Mute Toggle (MTG): Press the button briefly to change between muted and
activated microphone.
3.7 How to display the frequency
• Press both arrow-shaped buttons simultaneously.
• The frequency will be displayed for approx. 2 seconds.
3.6 How to select a channel
• Press the on/off button and one of the two arrow-shaped buttons
simultaneously for approx. 2 seconds until the channel display will flash.
• Use the upper or lower arrow-shaped button to select the requested channel.
• The channel will automatically be stored after approx. 2 seconds. If you press
briefly the on/off button , the channel will immediately be stored.