Manualshelf

User's Manual

ManualsBrandsBeyerdynamic ManualsElectronicsBodypack Transmitter
11121314151617181920
Synexis – Synexis C8 / C10 / C20 / CHP Chargers
19
Safety information:
• Never charge a beltpack receiver, handheld or beltpack transmitter when they are powered with normal batteries!
The batteries can explode and damage the transmitter!
• Despite the Auto-Off function we recommend turning off the receivers, handheld and beltpack transmitters before charging!
• After a power failure or after the receiver and/or transmitter has been reinserted, the entire charging process begins again.
Overcharging is prevented however.
• If you use the transmitter and receiver from time to time only, we recommend to recharge these devices every 2 or 3 months to avoid
the rechargeable batteries being over-discharged due to self-discharge.
• Do not cover the ventilation slots of the Synexis C8, C10, C20 chargers. With Synexis C20 charge only when the case is wide open.
6.2 How to use the chargers
• The Synexis chargers have been developed for charging the rechargeable batteries inside the Synexis RP beltpack receiver, Synexis TP
beltpack transmitter and Synexis TH handheld transmitter.
• Synexis C8 provides 8 charging compartments for the Synexis RP beltpack receiver or Synexis TP beltpack transmitter and one charging com-
partment for the Synexis TH handheld transmitter.
• Synexis C10 provides 10 charging compartments for the Synexis RP beltpack receiver or Synexis TP beltpack transmitter .
• Synexis C20 provides 20 charging compartments for the Synexis RP beltpack receiver or Synexis TP beltpack transmitter and one charging
compartment for the Synexis TH handheld transmitter. The charger is built into a practical trolley. The accessory compartment in the cover
of the case provides room for headphones and microphones of the beltpack receivers/transmitters.
• Synexis CHP provides 2 charging compartments for the Synexis RP beltpack receiver or Synexis TP beltpack transmitter or the Synexis TH
handheld transmitter.
• The Synexis C8 or C10 charger has been designed for the installation into a 19" rack (3 U). When you install the charger into a 19" rack,
make sure that the charger is connected to a switchable mains supply.
Synexis CHP with beltpack transmitter/receiver and handheld transmitter
Synexis CHP with beltpack transmitter/receiver