User Guide
Quick Start Guide TG 1000 – Diversity Receiver
10
1. Introduction
Thank you for selecting the digital wireless TG 1000 system from beyerdynamic. Please take some time
to read carefully through this manual before using the system.
You will find an extensive description of the different functions for using the TG 1000 system and the
“Chameleon” software, which only requires an internet browser, in the “TG 1000 - Digital Wireless
System” manual on the internet at www. beyerdynamic.com/tg1000
Please also refer to the supplied “Safety Information” booklet.
2. Digital TG 1000 UHF Diversity Receiver
Hole for 19" rack mounting
Hole for mounting the antennae on the front
On-off switch
Infrared interface for synchronising receiver and transmitter
Button of synchronisation for channel 1 or channel 2
RF indicators channel 1 or channel 2
AF indicators with peak indicator channel 1 or channel 2
Display channel 1 and channel 2
Channel selector button 1 or 2
Rotary switch for selection and settings
ESC button (Escape)
Function button
Button to monitor channel 1 or channel 2 via headphones
Headphone connection, 1/4" stereo jack (6.35 mm)
Antenna input A or B, BNC socket
Antenna output A or B, BNC socket
Audio output, balanced, 3 pole jack, channel 1 or channel 2
Audio output, balanced, 3-pin XLR, channel 1 or channel 2
Ethernet interface (RJ45)
Mains connection
Front
Rear