Manualshelf

User's Manual

ManualsBrandsBeyerdynamic ManualsElectronicsWireless Beltpack Transmitter
11121314151617181920
Opus 600 – TS 600 Beltpack Transmitter
20
4. TS 600 beltpack transmitter
4.1 Controls and indicators
Transmitting antenna.
Battery status LED to indicate the power on-off and battery status.
(a) When the beltpack transmitter is switched on this LED will flash for a moment to indicate the
normal battery status.
(b) When the LED stays red after having switched on the transmitter the battery is too weak and
must be replaced.
On-off switch (ON = switch to “ON“-position; OFF = switch to “OFF“-position).
Switch off the transmitter when not in use.
AF input, 4-pin mini XLR for microphones (lavalier, neckworn mics).
For connection please refer to chapter 4.5 AF Connection.
Infrared receiving diode for ACT function.
Gain control to adjust input gain.
