Quick Start Guide

Unite TH – Handheld Transmitter
1
6
5.2 Set group ID
The group ID identifies devices that can be placed in a
virtual group. For example, all devices of a building, a tour
group or a conference room.
The factory-preset group ID is 256. To set a group ID
between 1 and 255, follow the steps below:
• Press and hold the menu button  for 2 seconds to
activate the main menu.
• Use the multifunction button  to select “System” from
the menu.
• Press the menu button  to open the required submenu.
• Use the multifunction button  to select the “Group ID”
submenu.
• Press the menu button  to set an group ID.
• Use the multifunction button  to select the desired
group ID.
• Press the menu button  to confirm the selected group ID.
Make sure to select the same group ID for all devices of a
desired group. Only devices that have the same group ID
can communicate with each other. Transmitters with other
group IDs are hidden. See the following diagram.
Group ID 256 Group ID 1
RPRP RP RP
TH1 TH2 TH3