Operation Manual

BEYERTONE
®
AG
www.beyertone.com
© X-2007 BEYERTONE AG CR-200 / CR-100 USB Ver. 2-3 - Installation and User Guide 33/64
There are two important indicator lights on top of the CR-200 unit:
•
the status LED (red/green/yellow)
•
the USB LED (yellow)
The indicators will show the unit’s status at any time.
The LED lights have this meanings:
Status LED:
Indication Meaning
Q yellow
waiting for flashdrive stick / starting the flashdrive stick
Q green
unit ready
Q red
recording active
Q red flashing after recording
timeout for discarding function (see 5.2)
Messages Meaning
Q green flasing (short pulses)
unit in standby mode (see 5.2)
Q green flashing continuously
memory nearly full (see 7.2)
Q ret flashing continuously
memory full (see 7.2)
Errors Meaning
Q red flashing after start-up
date/time invalid (see 5.1)
Q rot flashing (short pulses)
internal error -> unit restarts
Q yellow flicker after start-up
internal update running -> do not power off!
USB LED:
Indication Meaning
Q 3x flashing
starting the USB port of the CR-200
Q yellow light
USB flashdrive stick ready
Q flashing
read/write data
Q off
no flashdrive stick inserted or stick removed