Operation Manual

BEYERTONE

www.beyertone.com

6.1 Import of recordings from the USB flashdrive stick (CR-200)

While the CR-100 USB directly records files onto the PC, the CR-200 will save recorded

files independently on a USB flashdrive stick. For playing back and archiving these

recordings, you first have to import them into the archive of the CallRecorder software.

To do so, please proceed as follows:

1. Insert USB flashdrive stick

Pull the flashdrive stick out of the CallRecorder and insert it into a free USB-slot on your

PC or laptop.

If you (e.g. under Windows 98SE) should need a driver for the flashdrive stick (Hard-

ware-Assistant comes up), you will find it on the website of the manufacturer of the

flashdrive stick. If you should face problems in this, you can also lookup in the "Support"

section under www.beyertone.com, or you may get in touch with the technical support of

BEYERTONE AG (see section 8.3).

The USB flashdrive stick will be attached as a new drive on your PC. You can check

this by opening the Windows-Explorers. On the flashdrive you will find your recordings

as files with the ending ".CRB", and additionally a file named "INFO.TXT" (see section

3.2.6).

2. Open import window

For import of the recordings from the flashdrive stick, now open the 'Archive' window

(‘Archive’ item in the menu after right click on the CallRecorder symbol on the taskbar),

and there use the menu item “Archive / Import”. You can also use the button from

the menu bar of the Archive window. (For details regarding the Archive window, please

see section 6.2.)

Now the following window will appear for importing recordings from the flashdrive stick

(see next page):