Operation Manual

BEYERTONE
®
AG
www.beyertone.com
© X-2007 BEYERTONE AG CR-200 / CR-100 USB Ver. 2-3 - Installation and User Guide 54/64
•
The ‘Telephone’ tab:
By moving the ‘Sensitivity’ slider you set up here how sensitive the reaction of the CR-
100 USB should be for generating an automatic start trigger for the automatic ‘Call
detection’ function.
Under ‘Call end’, you can set for how long ‘Silence’ has to be detected in order to stop
the recording automatically.
Only change these two parameters if the unit’s automatic mode is not working
satisfactorily.
The next tab ‘Administrator’ provides settings, which should only be changed when
advised by the technical support.
NOTE: By clicking the button you can restore the delivery settings of the hardware.
After that, carry out the command ‘Communication / Send Parameters’.