Operation Manual

BEYERTONE
®
AG
www.beyertone.com
© X-2007 BEYERTONE AG CR-200 / CR-100 USB Ver. 2-3 - Installation and User Guide 59/64
•
The ‘Telephone’ tab:
By moving the ‘Sensitivity’ slider you set up here how sensitive the reaction of the CR-
200 should be for the automatic ‘Call detection’ function.
Under ‘Call end’, you can set for how long ‘Silence’ has to be detected in order to stop
the recording automatically.
Under Memory management you can adjust, at which thresholds the „Status“ LED will
show ’memory low’ and ’memory full’. Moreover, there is a parameter to set the
maximum internal ’Waiting time’ for the USB flashdrive when recording.
Only change the parameters above if the unit is not working satisfactorily.
The next tab ‘Administrator’ provides settings, which should only be changed when
advised by the technical support.
NOTE: By clicking the button you can restore the delivery settings of the hardware in
the current window.