User's Manual

5
low-quality accessories will damage your phone and dangerous!
 Due to long term not use or the battery is too low, it need to pre-charge for some time then display normally charging interface when charger is inserted,
Please
be patient!
NOTE: For your safety and the good environment, please do not throw away batteries anywhere.
WARNING: Any form of short-circuit may cause an explosion, fire or personal injury and other serious consequences!
3.6 PIN Code
PIN1 Code: it is a personal identification number for access to SIM card, avoid that IM card is used illegally. If your phone has been activated PIN1 code protection, the
screen will display "enter PIN" when power on . During entering the PIN1 code, the screen will use * instead of the content of typing. SIM cards and PIN1 are provided by
network operator at the same time.
PIN2 code: it is a personal identification number for the cost counter.
WRANING: if you input wrong PIN code for three times continuously, the SIM card will be locked. You should use the PUK code to unlock the SIM card. if you input
wrong PIN2 code for three times continuously, you should use the PUK2 code to unlock the SIM card, please contact your network supplier as soon as possible. Try to decode
by yourselves, which may lead to permanent failure of the SIM card.
3.7 PIN of Card 2
PIN Code of card 2: it is a personal identification number for access to SIM card, avoid that IM card is used illegally. If your phone has been activated PIN1 code
protection, the screen will display "enter PIN" when power on . During entering the PIN1 code, the screen will use * instead of the content of typing. SIM cards and PIN1 are
provided by network operator at the same time.
PIN2 code of card 2: it is a personal identification number for the cost counter.
WRANING: if you input wrong PIN code for three times continuously, the SIM card will be locked. You should use the PUK code to unlock the SIM card. if you input
wrong PIN2 code for three times continuously, you should use the PUK2 code to unlock the SIM card, please contact your network supplier as soon as possible. Try to decode
by yourselves , which may lead to permanent failure of the SIM card.
4. Brief Description
4.1 Dial Key
It is used to dial or receive incoming call. Left soft key is used for dial key of card 1. In standby mode, press left soft key to display the recent call records (all missed, dialed
and received calls , max.20 phone numbers)of SIM1 and SIM 2
4.2 End Key
It is to end incoming call or back to standby interface.
4.3 Standby Image
4.4 Language and Input Method
Input method of the phone including English and Simplified Chinese; use “S pin” input method.
4.5 Incoming Call Alert
The phone built in speaker and vibration motor, it provides the following call patterns:
Ringing
Vibration
Ringing After vibration
4.6 Services
The function is provided by SIM card and network provider
4.7 Group
Group can be classified into friends, families, vip , colleagues, other, etc. User can set different incoming call ring and incoming call photo for these groups
4.8 Term
Dial Domestic phone
 Input phone number by using Dial Key, then choose Dial From Card 1 or Dial From Card 2. If it is necessary to change the phone number, please press right
function key “clear ” to delete characters backwards. It will display the dial animation on the screen at dialing, SIM1(or 2) will display on the front of phone
number if Dial From Card 1 (or 2) is selected. After the other party answering the call, it will display the communication status information on the screen.
 Please press End Key to end the call after it is over.
 Dial Domestic phone: Area Code + Phone Number + Dial Key
Dial International phone
 To dial an international call, please long press the * Key in dialing interface until the prefix symbol “+” of international long-distance phone number appearing
on the phone screen, which allows you to dial a call from any country without knowing the prefix of local international phone number (for example, 86 in
China).
 Input the prefix, and then input the country code and complete phone number you want to dial. According to general rules, the country codes are as follows:
Germany 49, Britain 44 and Sweden 46 etc.
 Dial International phone: + Country Code + Complete Telephone Number + Dial Key
Dial extension of fixed phone.
 Some extensions of fixed phones can’t be connected directly, and you need dial an exchange number, and then dial an extension number. If you insert a pause
character “P” between the exchange number and the extension number when inputting telephone number, then this phone will finish all dialing for you, dial and
answer the extension automatically. The method for inputting “P” is long pressing * Key (it will show the character “P” on the display screen at this point).
 Dial extension of fixed phone (+ is not included )
 Exchange Number + P+ Extension Number + Dial Key
Emergency Phone
In any country covered by GSM networks, as long as you are in the network covering range (learn from the indication bar of network signal strength on the left-upper corner of
the phone screen), you can call an emergency service. If your network operator does not provide roam service in the area, it will display a message “Emergency Call Only” on
the phone screen to indicate you can only dial such emergency call. If you are in the network covering range, you can dial an emergency call even without SIM card.
* In some areas, 112 (emergency telephone) services are provided by the network operator, if abnormal, you may consult the network operator!
IMEI
International mobile phone identification number. Turn off the phone and remove the battery, the barcode label of the number can be seen in the back of the phone number. The
number is also stored in the phone, When the phone is on , then enter dial interface and input "* # 06 #", the IMEI number can be displayed.
IP Dial
Correctly input IP prefix number in “setting/call setting ” and activate IP dial, you can perform IP Dial in phonebook.
Note: whether it is required to activate IP Dial when dial a local phone, please consult network operator .
5. Basic Operation
5.1 Power On
Press and hold end key to turn on the phone. the phone will display power-on image and search available networks automatically if SIM card lock and phone lock are not
locked. When it connects to the network, the name of network operator will display on the screen. Now you can use the phone to dial or receive calls.
If a message of “please insert SIM card” appears when the phone is turned on. Please turn off the phone and then check installation of SIM card.
After SIM card is inserted, the phone will check whether the SIM card is useable and the following will display on the screen in order.
1> "Input PIN" - If you have activated the SIM lock.
2> "Enter phone unlock code" - if you have activated phone lock.
3> "No service" – it means failure of the network registration, unable to call at this time.
4> "Dial emergency phone " –only allow to dial 112 .
5> "Search" – the phone is searching for the network, until find the appropriate service network.
6> "China Mobile or China Unicom," – it means success of the network registration.
If the current mode is set to "double-card on" or " only card 2 on", when the phone automatically check whether SIM2 is available, the screen will display network
operator of the card.
7> "Input card 2PIN" - If you have activated SIM lock of card 2.
8> "No service" - it means failure of the network registration of card 2, unable to call at this time.
9> "Dial emergency phone " –only allow to dial 112 for card 2.