User's Manual
9
IP Dial：add or edit the number of IP Dial
More
z Call duration display: set whether display call duration.
z Call Duration Prompt:
set whether activate prompt call duration (beep once or periodic ), select “OFF”, and the function will be deactivated.
Note: some setting needs the support of network. Call Restriction needs the support of the local network and SIM card
6.4 Setting
Dual Card Setting: you can do the following setting at any time
ON dual card: enable card 1 and card 2.
ON cad 1 only:
ON card 2only:
Flight Mode:
Touch Screen Calibration:
The function is used to calibrate touch screen so that your touch pen cans write freely.
Phone Setting: You can set menu language, standby wallpaper and time.
Time and date: you can set city, time format , date format and other settings.
1. City Settings: select one city for the time settings to this phone.
Note: the options shall be used together with auto update time , it needs the support of network.
2. Time /Date Settings: set current time and date.
Note: it’s required to reset the time after replacing battery.
Special Reminder: in a in a specific area (e.g. on plane) , you shall turn off your phone before boarding so that avoid abnormal incidents.
Auto Power On/Off: set the time to power on or power off the phone.
Language: set the display language to the menus. (English or Simplified Chinese )
Preset Input Method: select one default input method.
Standby Menu Display: Wallpaper: Screen saver: Powering On Animation: Powering Off Animation: Display My number and Clock type (My number shall be
set in phonebook.).
Welcome Note: display welcome note at standby interface or close it.
Auto update time: enable or disable the function of auto update time.
When it is enabled, Auto Update Time will not affect your alarm clock, calendar or alarm
clock, they are subject to the time you set up. But Auto Update Time may cause expiration of some alarm clock . (the function is provided by the network
operators)
Handwriting Settings: set the handwriting speed and the color of the touch pen.
Other Settings: set the brightness of LCD and the delay time.
Note: please contact with your network operator or service provider for any services
Network Setting:
Name Introduction
Auto: Auto search the network of SIM card 1.
Network Selection
of SIM card 1
Manual: (enter selection mode)search all available networks at present and register one by hand.
Favorite Network
of SIM card 1
Prestore some networks you prefer.
Auto: Auto search the network of SIM card 2.
Network Selection
of SIM card 2
Manual: (enter selection mode)search all available networks at present and register one by hand.
Favorite Network
of SIM card 2
Prestore some networks you prefer.
Safety Settings
Lock of SIM card 1: enable or disable the function (PIN code)
Lock of SIM card 2: enable or disable the function (PIN code of card 2)
Fixed Dial of card 1: the function need the supports of SIM card and network operator. You only dial telephone numbers of Fixed Dial list of card 1, when you
activated the function, it is required to input PIN2 code of card 1.
Fixed Dial of card 2: the function need the supports of SIM card and network operator. You only dial telephone numbers of Fixed Dial list of card 1, when you
activated the function, it is required to input PIN2 code of card 2.
Prohibit Dial : enable or disable partial or full limit (the fucintion needs the support of SIM card)
Opposite with fixed dial, you can set Prohibit Dial to some numbers.
Change password:
z PIN: input a PIN password (e.g. :1234 ) of card 1, then change it to the desired numbers (4-8digits ) .
z PIN2: PIN: input a PIN2 password (e.g. :1234 ) of card 1, then change it to the desired numbers (4-8digits ) .
z PIN of card 2: input a PIN password (e.g. :1234 ) of card 2, then change it to the desired numbers (4-8digits ) .
z PIN2: PIN of card 2: input a PIN2 password (e.g. :1234 ) of card 2, then change it to the desired numbers (4-8digits ) .
Phone lock: enable or disable phone lock. phone lock has a 4-8 digits of password( the default is 1122), you can change it to the desired numbers
Keypad lock: enable or disable lock: 5 seconds, 30 seconds, 1 minute, 5 minutes.
z Change phone password: you can change the default password (1122) to the desired numbers (4-8digits ). If phone lock is activated, the phone will
prompt the message of “phone locked” when you power on the phone. Input the phone lock password and click OK to unlock .
Restore Factory Settings：
The default password is 1122.
6.5 Multimedia
[Camera]：
You can use the built-in camera to shoot photos and adjust the camera settings. Camera lens is located at the back of the phones and mobile phone screen as a viewfinder
window. The photos generated by camera are JPG format. When these photos are downloaded to a computer, you should use appropriate software to view!
If the phone has not sufficient storage space for new photos, you will need to remove some old photos or the other documents in "file management" menu of in order to release
storage space.
Camera Options Help
Introduction
Album View the photos saved
Camera settings Fill light, shutter sound, exposure compensation, flicker-free, delay shooting, continuous shooting settings.
Size: 320*240,640*480,800*600,1600*1200,2048*1536,
Photo settings
Quality: middle, high, low.
White Balance Auto, sunlight, trngsten lamp, daylight lamp, cloudy, incandescent light
Mode Auto and night
Effects settings Normal, gray, retro, retro green, retro blue, negative