User's Manual

keyboard.

The opening of the direct current SIM card 1.

The opening of the direct current SIM card 2.

Getting Started

SIM card and install the battery

Be sure to remove the battery before the closure of the mobile

phone and charger and disconnect the connection.

This phone card for dual dual-standby to be long, you can

insert 2 SIM cards, two SIM cards of GSM will be registered

at the same time the GSM network. Each SIM card in a general

card, insert the card next to a card, insert the card on the

card for 2. SIM card and its contacts can easily scratched

or damaged and bent, therefore, be inserted or removed when

the SIM to be careful.

1 Remove the battery cover.

2 Remove the battery.

3 Slide the SIM card into the card connector fixed.

4 Insert the battery.

5 Cover the battery cover.

For battery

When the battery is low, the phone will sound a warning,

indicating lack of electricity, and free battery icon

instructions. In that case, may not be able to use the phone's

functions.

If the battery is too low, the phone will automatically shut

down. Please phone battery.

Phone start charging, the battery icon on the screen will

be flashing. Upon completion of charge, will show

full-screen cell battery icon. Phone charger off, the screen

will display screen state-of-charge. Charging is completed,

the screen will show that prompt completion of the charge.

Stand-by mode, the charging time of about 2-3 hours.

1. Insert the AC power outlet charger.

2. Open the phone interface charge of the protection of

the rubber set, will be connected to the phone charger.

3. Appear on-screen instructions charge symbols. (If

the battery is completely depleted, you may need to wait a

few minutes, will appear on-screen instructions charging

symbol.)

4. The completion of charge from the power outlet on the

charger off, and then remove the phone from the charger.

Startup and Shutdown