Installation Guide

ManualsBrandsBEYOND LED TECHNOLOGY ManualsLightingI9 Premium 300-Watt Equivalent Integrated LED Bronze Housing Straight Arm Parking Lot Area Light 5000K 39600 Lumens

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087

Due to continuous product improvement, information in this document is subject to change.

i9 Premium Area Light

Beyond LED’s i9 Area light is an energy-

efficient, economical, and reliable product

suitable for outdoor applications. It offers

high lumens per watt for maximum power

savings and rebates from power companies.

It can provide consistent lighting with instant

start and retains its uniform operation even

under wet conditions. It is an ideal solution

for all outdoor applications particularly

lighting parking areas, loading docks and

other general lighting applications.

• Operating temperature: -40°C to 45°C

• High efficacy Bridgelux SMD LED

• Die Cast Aluminum housing

• Ultra-thin sleek design

• Integral LED driver, eliminates the need for an external driver

or ballast

• Complies with UL safety regulations

• This product is IP65 rated, therefore, it is best suited for outdoor

applications

• Up to 132 LM/W efficacy, Energy saving with long lifespan

• Available in White, Bronze, Grey, or Black Housing

• Several brackets

• Heat resistant polycarbonate optical lens

• Environment friendly with no mercury

Product Features

Summary of content (12 pages)

PAGE 1
i9 Premium Area Light Beyond LED’s i9 Area light is an energyefficient, economical, and reliable product suitable for outdoor applications. It offers high lumens per watt for maximum power savings and rebates from power companies. It can provide consistent lighting with instant start and retains its uniform operation even under wet conditions. It is an ideal solution for all outdoor applications particularly lighting parking areas, loading docks and other general lighting applications.
PAGE 2
SKU # 153575 153460 153576 153461 153503 153504 153502 153577 Model # BLT-SB03D150WXYA1abcdfe BLT-SB03D300WXYA1abcdfe BLT-SB03D150WXYA1abcdfe BLT-SB03D300WXYA1abcdfe BLT-SB03D150WJT3A1GR10SP50 BLT-SB03D300WJT3A1GR10SP50 BLT-SB03D150WXYA1abcdfe BLT-SB03D300WXYA1abcdfe Housing Watts Lumens CCT IP Black 150W 19800LM 5000K IP65 Black 300W 39600LM 5000K Bronze 150W 19800LM Bronze 300W Grey Input Dimming Certifications 100-277V 0-10V UL & DLC IP65 100-277V 0-10V UL & DLC 50
PAGE 3
150W Specifications Parameter Description General Input Power Performance Color Temperature Lumen Lumen Efficacy CRI (Ra) Distribution Pattern Beam Angle Electrical Input Voltage and Frequency Dimming PF THD Flicker Percent Driver Brand Driver Model Driver Surge Protection Physical Storage Temperature Operating Humidity Storage Humidity LED Brand LED Type LEDs QTY Housing Housing Color EPA Qualification IP Rating Warranty Value 150W 5000K Up to 19800LM Up to 132LM/W >70 Type III (Optional: Type IV and Typ
PAGE 4
300W Specifications Parameter General Performance Electrical Physical Qualification Description Input Power Color Temperature Lumen Lumen Efficacy CRI (Ra) Distribution Pattern Beam Angle Input Voltage and Frequency Dimming PF THD Flicker Percent Driver Brand Driver Model Driver Surge Protection Operating Temperature Storage Temperature Operating Humidity Storage Humidity LED Brand LED Type LEDs QTY Housing Housing Color EPA IP Rating Warranty Value 300W 5000K Up to 39600LM Up to 132LM/W >70 Type III
PAGE 5
Correlated Color Temperature (CCT) Photometric Data – 150W Photometric Data – 300W Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087 Due to continuous product improvement, information in this document is subject to change.
PAGE 6
Dimensions 150 Watts Slip Fitter Mount Yoke Mount Straight Arm Mount 300 Watts Slip Fitter Mount Yoke Mount Straight Arm Mount (866) 786-1117 • www.BeyondLEDTechnology.com Due to continuous product improvement, information in this document is subject to change.
PAGE 7
Installation Instructions 1. Slip Fitter Mount a. Loosen the 4 locking bolts on the slip fitter, connect the wire correctly and put the wire into pole. Then fasten the locking bolts between slip fitter and the pole (Figure 1-1) b. Loosen the fixing bolts and adjusting bolts, align the fixture to required angle. Tighten adjusting bolt and fixing bolts after the angle is confirmed. (Figure 1-1) 2. Yoke Mount a. Loosen cap fixing screw and take cap off.
PAGE 8
3. Straight Arm Mount a. Open the side lid of direct bracket, let the power cable go through the direct bracket. Fix the direct bracket to the end of lamp body with bolt. Let the pole cable go through the direct bracket. (Figure 3-1) b. Fix the direct bracket to the square pole with bolt. Connect the power cable to the pole cable, make sure good protection on the wire connection, and put the wire in the direct bracket; close the side lid and tighten it, (Figure 3-2) then finish in installation. c.
PAGE 9
Motion Sensor Function (Optional) Structure of Motion Sensor (With Shorting Cap) Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087 Due to continuous product improvement, information in this document is subject to change.
PAGE 10
Wiring Diagram Packaging Bracket Type Size Qty/Box 150W Box 23.82 X 14.57 X 6.69 in 1 PCS 300W Box 32.28 X 15.34 X 6.50 in 1 PCS Slip Fitter Bracket Box 15.55 X 8.66 X 8.86 in 8 PCS Yoke Bracket Box 14.37 X 11.22 X 6.30 in 8 PCS Straight Bracket Box 18.31 X 8.46 X 7.28 in 6 PCS **Tolerance of Carton Size: ±15 MM, Tolerance of Weight: ±10%. (866) 786-1117 • www.BeyondLEDTechnology.com Due to continuous product improvement, information in this document is subject to change.
PAGE 11
Application Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087 Due to continuous product improvement, information in this document is subject to change.
PAGE 12
Safety Precautions To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions included with and on the fixture box and all fixture labels. Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions. Commercial installation, service and maintenance of luminaires should be performed by a qualified licensed electrician.