Instructions / Assembly
DI M- :PINK
DI M+:Purple
GN D-:Green
AC N-:White
AC L-:Black
Notices:
Instructions:
Cautions:
1. Can not use the electric generator to test the LED lamp.
2. Please abide by related country, regional and local law and regulations when install this fixture.
3. To avoid electrical shock and damage, please do not install the lights in raining days.
4. Please turn off the power before installation or maintenance. Proper grounding is required to ensure safety.
1. To prevent from electric shock or fire risk, installation must be conducted by operator with professional
electrical knowledge.
2. Please wear gloves to avoid injury before installing lamps.
3. During or after installation, if there are situations such as smoke, fire in the wires or lamps, please turn
off the power immediately and notify relevant personnel for an overhaul.
4. This light can be used for outdoor installation.
1. Adjustable color temperature.
2. This product has dimming function.
3. 2 dimming functions are available for this LED lamp.
(1) Constant current can be achieved by 0-10VDC dimming.
(2) Variation of resistance unit dimming (Please choose the appropriate dimming way according to your
needs. You can also choose not to use this function.
4.Choose the wire connection ways, dimming ways and installation ways according to your needs.
Wiring Diagram:
1/2 ADJUSTABLE FITTER MOUNTING (1/2AM)
Step 1: Take the lamp out of package (Figure1);
Step 2: Finish wire connection according to the right mode of connection (pay attention to positive wire,
negative wire, and ground wire), and then put wire into lamp pole (Figure2);
Step 3: Loosen screws; adjust fixture angle as per actual demands and tighten screws later; Tips:Angle
of the fixture is adjustable (Figure3);
(pass the bracket through mounting surface, fix it with screws, then connect the wires as per proper wiring
requirements.) (Figure4)
(866) 786-1117 • www.BeyondLEDTechnology.com
7
LED LANDSCAPING LIGHTS
BOISE
TM
2nd Gen