Specification Sheet

®
Color Code:
Yellow
Bend Radius:
Minimum / 5cm
Cable Jacket:
3.0mm LSZH
Operating Temperature:
-4° to 158° F (-20° to +70° C)
Core:
OS1 9/125μm
Jacket:
Standard Zip Cord Duplex
Termination:
Connector A (ST) / Connector B (ST)
Features:
Connectors feature dust caps on the tips for
protection. ST and ST duplex assemblies are
attached with easy-removable clips.
FEATURES AND BENEFITS
• Our OS1 ber patch cords conform with TIA/EIA
492AAAA and IEC60793-2-10 A1b standards and
complies with RoHS specications.
• Our OS1 cables have a 0.25 dB/km attenuation at 1550
nm and 0.35 dB/km at 1310 nm.
• This Single mode OS1 ber patch cords operate at -20ºC
to +70ºC and have a minimum installation bending radius
of 5.0 cm and a minimum long term bending radius of 3
cm.
• OM1 patch cords allow for connections between
patching panels and network and server equipment.
OS1 9/125 patch cords are commonly used in passive
applications (GPON, FTTX and LANs). - (LC duplex
connectors are joined with a plastic clip, easy to remove
in case you need to separate the connectors.)
Beyondtech PureGigabit
™
Fiber Patch Cables
BTPSTUSTU-0DC-1M1P
Beyondtech’s high-quality ST to ST Fiber Patch Cable
9/125μm OS1 ber is specially designed for fast Ethernet,
Fiber Channel, Gigabit Ethernet Speeds, data center,
premises, educational, LAN, SAN, commercial, 10GBASE-L
(1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm)
and Asynchronous Transfer Mode (ATM) applications. It
supports video, data and voice services.
SPECIFICATION SHEET
SPECIFICATIONS
©2017 Beyondtech, Inc. All rights reserved. Beyondtech
®
is a trademark of Beyondtech, Inc. | www.beyondtech.global