PHOBOS BT D811316 10-11-01 Vers.
PHOBOS BT 156 1) GENERAL SAFETY WARNING! An incorrect installation or improper use of the product can cause damage to persons, animals or things. • The “Warnings” leaflet and “Instruction booklet” supplied with this product should be read carefully as they provide important information about safety, installation, use and maintenance. • Scrap packing materials (plastic, cardboard, polystyrene etc) according to the provisions set out by current standards.
PHOBOS BT 4.3) Off-standard installations. Fig. 3 shows an installation with a recess when there is not sufficient space between the leaf and perimeter wall. When the leaf’s position does not allow for an “a” value listed in the table, the leaf’s hinge pivot can be shifted (fig. 4), or a recess can be made cut out of the actual gate-post (fig. 5). 4.4) Mounting the brackets to the gate-post and to the gate. Fix the bracket “P” (fig. 6) to the gate-post with a good welding.
PHOBOS BT • Check the opening and closing manoeuvres using the controls. • Check the control unit’s electronic logic in normal (or customised) operation. 12) USE OF THE AUTOMATION Since the automation may be remote controlled either by radio or a Start button, it is essential that all safeties are checked frequently. Any malfunction should be corrected immediately by a qualified specialist. Keep children at a safe distance from the field of action of the automation.
PHOBOS BT 102 Fig. 1 FC2 B FC1 80 80 1027 713 10 280 1027 Fig.
PHOBOS BT Fig. 3 Fig. 4 45 1050 800 b b b a Fig. 6 Fig. 5 160 b P Fig.
PHOBOS BT Fig. 8 Fig. 9 Fig. 10 T Z PF PF Fig. 11 FA FA FA Sx Dx 161 Fig. 12 M AL S Fre 2 mm 1.5 4x 2 m 1m 2x Fti 2 M P 3x1mm 2 3x1 m 1m 4x mm 2 RG R 58 CF Q 2x1 Fte .5m m2 2x1 mm 2 2 mm 1.5 4x D811316_02 T 2 Fri m 1m 4x CF AUTOMATION FOR SWING GATES I 3x1 2x1 .5m m2 .
PHOBOS BT Fig. 13 Fig.
PHOBOS BT Fig.
