User manual Hobby Eagle A3 Super II

[e-mail] 26
*Voltage Protector
After installing the gyro, the servos will move more frequently than before, it is
highly recommended that a reliable UBEC or ESC be used to provide sufficient
working current for the servos on the plane, otherwise the gyro may become
unstable by an occasional voltage drop. A large capacitor (3300uF/16V) can be used
to get a more stable and secure voltage level. You just need to simply plug it into
any open slot of the gyro or the receiver.
Specifications
Main Controller 32-bit MCU
Sensor 3-axis gyroscope and 3-axis accelerometer
Gyroscope Scale Range ±2000dps
Accelerometer Scale Range ±4g
Input Signal Standard PPM with center point 1520uS, or S.Bus serial data
Output Signal PWM max frequency 333Hz, 1520±500uS
Input Voltage 4.8V～8.4V
Operating Temp -10℃～50℃
Size 43×27×14mm
Weight 10g (excluding wires)