Installation Guide

USE & Care Manual and Warranty Information
Installation
When installing the Bgears Fan Grill or Fan Filter on a Fan, please use the mounting mechanism supplied with your fan (fan clips, screws, etc.) as
described in their manufacturer manual.
Fan Filter:
Fan Filter consist of 3 parts: Top Grill Cover; Middle Sponge Filter; Bottom Fan Grill cover to installed on the fan.
Fan Grill/Guard
Fan Grill/Guard installed on a Fan using the fan mounting Screws provided by the Fan.
Connection
The Bgears Fan (Depending on the model) comes with either a 3-pin connector (Like the b-Blaster Series), or 4-pin PWM (Like the b-PWM series) fan
connector for fully automatic speed control via your mainboard’s 4-pin PWM fan headers. Please check the model you have purchased to verify the type
of connector the fan is designed for. The package also come with a 3-pin to 4-pin Molex adapter. This Adapter is to convert the existing 3-pin or 4pin fan
connector on the fan into a 4-pin Molex connector so it can be connected directly to a power source that come in 4-pin Molex type connector.
N