Owner`s manual

ASSEMBLY INSTRUCTIONS (cont’d)
RS8 RECUMBENT CYCLE
FIGURE_6 ASSEMBLY FOR STOP BAR&
RIGHT SIDE HANDLE BAR
Repeat step 3 above for the opposite handlebar
Step2 .Attach the seat pad(G)
onto the slider base(P1) and secure
with 4 bolts(N1),washer(N3)
from underneath the seat
Step2. Connect (J1-1) from the handle
to (A3)(base slider) and slide handle bar
(J1) onto base slider(A10)
Secure using 4 screws(N8).
Step1.Place the back support tube(P) on the slider base
A10 and
secure tightly using
washer(N3) and bolt(N1).
FIGURE 5: SEAT SLIDER RELEASE HANDLE
& RIGHT HANDLE BAR ASSEMBLY
Step1. Insert the slider handle (A11)
into the round peg and use set
N10 to fix it in placescrew
assembly
A2
P
J1
N8
J1-1
A10
A3
N6
N3
N1
A3
N10
N3
P
A11
A2
N8
J2
J2-1
9
BH Fitness • 20155 Ellipse • Foothill Ranch • CA • 92610
www.bhnorthamerica.com • Phone [phone] • Fax [phone]
RS8