System information
Table Of Contents
- Introduction
- Configuration and Setup
- Physical Details
- System Features
- Interfaces and Connectors
- Utility I/O Connectors
- IDE
- SATA Ports
- Serial Ports
- Parallel/Floppy Port
- PS/2 Keyboard and Mouse
- USB
- CompactFlash
- Programmable LED
- External Speaker
- Push-Button Reset
- Video Interface
- Ethernet Interface
- CPU Temperature Monitor
- Audio
- Watchdog Timer
- Analog Input
- Digital I/O
- SPI Interface
- PWM Outputs and TACH Inputs
- PC/104 Expansion Bus
- System Resources and Maps
- Special Registers
- Appendix A – References
Configuration and Setup
EBX-22 Reference Manual 9
Figure 3. Typical Start-up Configuration
1. Install Memory
Insert the DDR2 DRAM module into the SODIMM socket J2 and latch it into place.
2. Attach Cables and Peripherals
Plug the video adapter cable CBR-1201 into socket J7. Attach the video monitor interface
cable to the video adapter.
Plug the USB CD-ROM drive, keyboard, and mouse into on-board USB sockets (J3, J4,
J9, or J11).
Plug the SATA data cable CBR-0701 into socket J8 or J10, and attach the SATA hard
drive to the cable.
OS Installation
CD-ROM
J6
J7
J4 J11
J3 J9
EBX-22
“Sidewinder”
USB Keyboard
and Mouse
Analog SVGA
ATX
Power
Supply
J10
J8
SATA
Hard Drive
CD-ROM
Drive
CBR–1201
CBR–0701
USB
USB
CBR–2022
CBR–0401